Colorants, Volume 2, Issue 2 (June 2023) – 10 articles

This study attempts to take aspects of pottery technology into account while concentrating on the blue pigment and glaze recipes of various kinds of glazed pottery types; that is to say, Iznik ware, Kütahya ware, Miletus ware, glazed fritware, porcelain, polychrome glazed ware, and monochrome glazed ware were collected from a rescue excavation site within the Castle of Mytilene in Lesvos Island, Greece. The decoration, surface treatment, and production technology were investigated on the basis of 23 ceramic fragments that can be dated to the Turkish/Venetian period. The present study concerns the manufacture of glazed pottery, and in particular, colour recipes and issues of glaze technology. This study endeavoured to look into the specifics of the medieval colour recipes used on the glazed ceramics from Mytilene. This was accomplished by using an analytical process that took into account the compositional information of blue pigments, glazes, and slip coatings. The chemical analysis was conducted using scanning electron microscopy (SEM-EDS), Raman spectroscopy provided information about the compositional variation, and the optical examination via optical microscopy (OM) and scanning electron microscopy (SEM-EDS) yielded information about the sample stratigraphy of the examined ceramic sections. This investigation into glazed ceramics was able to define and reflect the key aspects of each society’s perception of colour through a large variety of colour and glaze recipes. Full article

The importance of counter electrodes in Dye Sensitized Solar Cells (DSSCs) cannot be neglected as they enable the transfer of electrons across the outer circuit, thereby facilitating the reduction reaction of the I₃⁻/I⁻ redox electrolyte. However, the dissolution and deposition of the usual platinum layer on the counter electrode has resulted in contamination concerns. To address this issue, metal-free counter electrodes made of reduced graphene oxide (rGO) aerogels were developed and their catalytic performance towards I₃⁻ reduction was evaluated. The reduced graphene materials were characterized, and the fitting analysis of XPS revealed the presence of various nitrogen species, with the primary peaks attributed to pyridinic and pyrrolic nitrogen. The hydrothermal treatment of graphene oxide (GO) resulted in a higher graphitic character and the intensification of the contacts between graphene nanosheets, which should entail higher electrical conductivity, both in-plane and between rGO sheets. Additionally, the presence of nitrogen-provided active sites promoted the catalytic reduction of the electrolyte. Encouragingly, good charge transfer rates were observed between the counter electrode and the electrolyte in the assembled DSSCs, resulting in good photocurrents and exceptional stability over the course of nearly 1200 h after cell assembly. The results obtained suggest that these GO-based systems are promising candidates for developing metal-free counter electrodes for DSSC, supporting the interest of further study. Full article

Environmental remediation in the presence of robust semiconductor photocatalysts by utilizing renewable energy sources is of keen interest among researchers. In this study, we synthesize a BiVO₄/P-g-C₃N₄ semiconductor heterojunction photocatalytic system through a hydrothermal route followed by utilizing a total-solvent evaporation method. The optical and electronic properties of the as-prepared heterojunction are characterized via various spectroscopic techniques. Rhodamine B (RhB) and Congo Red (CR) are used as synthetic colorants to evaluate the photocatalytic performances of BiVO₄/P-g-C₃N₄. In addition, the chemical environment of the photocatalyst and its mechanistic pathways are confirmed through X-ray photoelectron spectroscopy and electrochemical Mott–Schottky analysis. The BiVO₄/P-g-C₃N₄ photocatalyst shows higher photodegradation (96.94%) of the mixed synthetic dyes under simulated solar-light irradiation. The as-synthesized BiVO₄/P-g-C₃N₄ heterojunction significantly promotes the quick separation of photoexcited carriers due to the excellent synergetic properties, the extended light absorption, and the photoelectrochemical response. Furthermore, a possible type-II charge transfer mechanism is adopted for the BiVO₄/P-g-C₃N₄ system after investigating the band potentials, active species, and charge carrier migration over the heterojunction interface. Full article

Phthalocyanines (Pcs) are 18-electron π-conjugated macrocyclic ring systems with proven activities in diverse fields, including pharmaceuticals and catalysis. These demonstrated activities are often alluded to as their fascinating photophysical and photochemical dispositions, which are usually dependent on their molecular structures. However, many of these molecules suffer from aggregation due to π–π stacking and have limited insolubility in hydrophilic media, which limits their extensive utilisation in pharmaceutical applications. This review will explore the possibility of fine-tuning the physicochemical properties of phthalocyanines when designed as multicomponent crystals. Among the proven and SMART approaches that have been shown to enhance drug solubility without altering the molecular structure is co-crystallisation. This protocol involves the design and formation of non-covalent interactions between two or more molecular entities to create a supramolecular assembly and subsequently afford multicomponent crystals (MCCs). A systematic review of the Cambridge Structural Database repository yielded several single and multicomponent crystals of Pcs; however, most of them were either salts or solvates, with only a few reports on their co-crystals. Full article

Diaryl-furanones are specific analytical reagents for the biochemical detection of primary amines by fluorescence techniques. Well-known reagents are fluorescamine (Fluram) and 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF), yielding fluorescent products with λem at 480–490 nm. Although the reaction products claim to be pyrrolinones, recent studies show that they are really 3-oxopyrrole (pyrrolone) derivatives. Both reagents have been used for the cytochemical demonstration of primary amines. In this work, we have applied the fluorescent products of MDPF with amines (n-butylamine, BA; glucosamine, GA; and spermine, Sp), which showed interesting fluorescence reactions with chromatin DNA. 2,4-diphenyl-3-oxopyrrole products (diPOPy) can be easily synthesized according to well-known procedures, by mixing solutions of MDPF in acetone with water at pH 9 containing the amino compounds. DiPOPy derivatives of BA, GA, and Sp were used for spectroscopic, microscopic, and molecular modeling studies, showing a bright and selective blue–green fluorescence on DNA substrates, mainly chromatin, kinetoplast DNA, and stretched chromatin fibers. The cationic diPOPy fluorophore is planar, with a high partial positive charge in the N atom, and suitable for intercalative binding to DNA. A mechanism of fluorescamine fluorescence due to an inner-salt isomeric form is proposed, and an astonishing correlation between adenine–thymine-rich centromeric heterochromatin in mouse metaphase chromosomes after reaction of the fluorescamine reagent with protein amino groups is also discussed. Full article

The textile industry has been exploring sustainable chemicals and natural alternatives to replace harmful and carcinogenic substances used in different stages of textile production for dyeing textiles. Natural dyes are gaining popularity, as they are environmentally friendly and less harmful. Betacyanin, a type of pigment obtained from red pitahaya, commonly known as red dragon fruit (Hylocereus polyrhizus), has peels that are available as agricultural waste and can be used to meet the demand for natural dye production. This study aimed to explore and utilize dragon fruit’s peel as a natural colorant for dyeing 100% cotton knit fabric (scoured and bleached single jersey plain knit) of 170 g/m², which could transform a low-value material into a valuable product. However, cotton’s phenolic nature and oxidation process result in negative charges on its surface, making natural dyeing challenging. Cationization with cationic agents (ForCat NCH, a mixture of cationic polyamine and 1,3,dichlori-2-propanol) and mordanting (potassium alum or potassium aluminum sulfate) were carried to improve dye exhaustion and enhance colorfastness properties. Spectrophotometer 800 was used to measure color strength (K/S), and several fastness tests, including wash, perspiration, and rubbing were conducted to assess the final product’s performance. The process parameters, such as temperatures, times, pH levels, and dye concentrations were varied to understand better the optimum conditions. Full article

Intending to provide efficient and compact wastewater remediation, the present work is exploiting and introducing a novel composite prepared from porous starch aerogel (PSA) and organically modified Ca-montmorillonite (OMMT) for the removal of dyes from aqueous samples. First, potato starch components were used as a hydrolysis precursor to obtain PSA. The organoclay samples were prepared by co-intercalation of octadecylamine (ODA) into Ca-MMT using a low-temperature melting procedure. Composites with different starch-to-organoclay ratios of 10:1, 1:1, and 1:10 were then prepared by a blending process in distilled water and used for methyl orange (MO) uptake. The removal of methyl orange dyes increased with the amount of organoclay in the PSA matrix. Characterization revealed that organoclay synergy improved the PSA surface chemistry, while an important improvement in textural properties and thermal stability was also observed. The composite’s efficiency was demonstrated by high removal capabilities towards MO in most experimental runs, with a maximum adsorption capacity beyond 344.7 mg/g. The fitting result showed that MO adsorption follows a monolayer adsorption model, and chemisorption was the rate-controlling step. Nonetheless, this study proved the great potential of PSA/OMMT in dyeing wastewater treatment. Furthermore, starch modification is proven as an effective approach to enhancing the performance of starch-derived adsorbents. Full article

Yves Klein (1928–1962) is best known for his intensely blue monochromatic works made with International Klein Blue (IKB), a synthetic ultramarine blue pigment bound in a poly(vinyl acetate) binder. However, he also made monochromes in other colors, including red and pink, the pigments of which have never been elucidated. Analysis of one sculpture, three paintings, and one screenprint by micro-Fourier transform infrared spectroscopy (µ-FTIR), Raman and surface-enhanced Raman (SERS) spectroscopies, portable X-ray fluorescence spectroscopy (p-XRF), and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometry (EDX), revealed that Klein used, knowingly or unknowingly, a variety of pink and red pigments, including Para Red, rhodamine 6G, rhodamine B, eosin Y, and alizarin lakes. The unexpected variety of pigments contrasts with his use of a single blue pigment and suggests he may not have held a singular vision of what constituted an iconic red or pink color. Full article

A series of boron difluoride compounds with 2-(imidazo[1,5-a]pyridin-3-yl)phenols bearing alkylic chains at the 1-position has been synthesized and characterized both with ¹H and ¹³C NMR and infrared spectroscopy. This series of compounds displayed blue emission in solution and in thin polymeric films, with interesting features like large Stokes shifts and good fluorescence quantum yields. Time-Dependent Density Functional Theory (TD-DFT) calculations allowed for the identification of the main electronic transitions as intra ligand transitions (¹ILT), as corroborated by the Natural Transition Orbitals (NTOs) shapes. Full article