Acoustics

This paper proposes the ‘soundsit’ as an alternative method to be used independently or in conjunction with current soundwalking methodological practice. The soundsit seeks to address the limits of the soundwalking method in relation to issues of transition, changing context, event occurrence, temporality, and inclusivity. Soundwalking and soundsitting are both methods of experiencing soundscape: soundwalking involves exploring and listening to the sounds of the environment while moving through it, while soundsitting involves sitting still in a particular place and listening to the sounds that exist in situ. The soundsit provides the participant or researcher with a fixed perspective and place to observe and experience sounds, within a defined soundscape context, enabling them to gain a longer-term experiential understanding of a space. Analogous with acoustic measurements, soundsitting is comparable to capturing average energy equivalent sound level LAeq measurements in allowing the perception of and activities within a soundscape to settle into a steady state. Beyond obtaining a longer-term impression of a chosen sound environment, soundsitting allows for a participant to disengage with the visual, which allows for deeper engagement and focus when listening to a soundscape; in addition, soundsitting removes the safety implications and distractions of walking practice and, as such, is a more inclusive form of activity, allowing those who are unable to walk to engage in the practice. The static nature of the listening experience allows for a different type of immersion through engaged active listening, something which is not possible on a soundwalk, allowing for deeper qualitative analysis and insight into the soundscape of a specific space or location. The primary findings show with test group of n = 6 that both methods are effective soundscape study tools, and further work with diverse groups is required. Full article

In the framework of electro-elasticity theory and the finite element method (FEM), a model is set up for the computation of quantities in surface acoustic wave (SAW) devices accounting for nonlinear effects. These include second-order and third-order intermodulations, second and third harmonic generation and the influence of electro-acoustic nonlinearity on the frequency characteristics of SAW resonators. The model is based on perturbation theory, and requires input material constants, e.g., the elastic moduli up to fourth order for all materials involved. The model is two-dimensional, corresponding to an infinite aperture, but all three Cartesian components of the displacement and electrical fields are accounted for. The first version of the model pertains to an infinite periodic arrangement of electrodes. It is subsequently generalized to systems with a finite number of electrodes. For the latter version, a recursive algorithm is presented which is related to the cascading scheme of Plessky and Koskela and strongly reduces computation time and memory requirements. The model is applied to TC-SAW systems with copper electrodes buried in an oxide film on a LiNbO₃ substrate. Results of computations are presented for the electrical current due to third-order intermodulations and the displacement field associated with the second harmonic and second-order intermodulations, generated by monochromatic input tones. The scope of this review is limited to methodological aspects with the goal to enable calculations of nonlinear quantities in SAW devices on inexpensive and easily accessible computing platforms. Full article

In commercial non-adaptive active noise control (ANC) applications, an IIR filter structure is often used to reduce real-time computations. On the contrary, an FIR filter structure is usually preferred in the filter design phase because the FIR filter design formulation can be convex and is simple to solve. To combine the benefits of both FIR and IIR filter structures, one common approach in ANC applications is to use an IIR filter structure to fit a pre-designed FIR filter. However, to ensure stability, most of the common IIR filter fitting approaches involve the computation and relocation of poles which can be difficult for high-order cases. In this current work, a stable IIR filter design approach that does not need the computation and relocation of poles is improved to be applicable in ANC applications. The results demonstrate that the proposed method can achieve better fitting accuracy and steady-state noise control performance in high-order non-adaptive applications when the pre-designed noise control FIR filter is fitted. Besides fitting the noise control filter, the proposed method can also be used to fit the secondary path and acoustic feedback path to reduce the required real-time computations if adaptive controllers are applied. Full article

Welding inspection is a critical process that can be severely time-consuming, resulting in productivity delays, especially when destructive or invasive processes are required. This paper defines the novel approach to investigate the physical correlation between common imperfections found in arc welding and the propensity to determine these through the identification of signatures using acoustic emission sensors. Through a set of experiments engineered to induce prominent imperfections (cracks and other anomalies) using a popular welding process and the use of AE technology (both airborne and contact), it provides confirmation that the verification of physical anomalies can indeed be identified through variations in obtained noise frequency signatures. This in situ information provides signals during and after solidification to inform operators of the deposit/HAZ integrity to support the advanced warning of unwanted anomalies and of whether the weld/fabrication process should be halted to undertake rework before completing the fabrication. Experimentation was carried out based on an acceptable set of parameters where extracted data from the sensors were recorded, analysed, and compared with the resultant microstructure. This may allow signal phenomena to be captured and catalogued for future use in referencing against known anomalies. Full article

Deep representation learning has gained significant momentum in advancing text-dependent speaker verification (TD-SV) systems. When designing deep neural networks (DNN) for extracting bottleneck (BN) features, the key considerations include training targets, activation functions, and loss functions. In this paper, we systematically study the impact of these choices on the performance of TD-SV. For training targets, we consider speaker identity, time-contrastive learning (TCL), and auto-regressive prediction coding, with the first being supervised and the last two being self-supervised. Furthermore, we study a range of loss functions when speaker identity is used as the training target. With regard to activation functions, we study the widely used sigmoid function, rectified linear unit (ReLU), and Gaussian error linear unit (GELU). We experimentally show that GELU is able to reduce the error rates of TD-SV significantly compared to sigmoid, irrespective of the training target. Among the three training targets, TCL performs the best. Among the various loss functions, cross-entropy, joint-softmax, and focal loss functions outperform the others. Finally, the score-level fusion of different systems is also able to reduce the error rates. To evaluate the representation learning methods, experiments are conducted on the RedDots 2016 challenge database consisting of short utterances for TD-SV systems based on classic Gaussian mixture model-universal background model (GMM-UBM) and i-vector methods. Full article

A comparison is considered of the experimentally obtained impedance of locally reacting acoustic liner samples with the impedance calculated using semi-empirical Goodrich, Sobolev and Eversman models. The semi-empirical impedance models are outlined. In the experiment, the impedance is synchronously measured on a normal incidence impedance tube by the transfer function method and Dean’s method. A modification of the conventional normal incidence impedance tube is proposed to obtain these measurements. To automate the measurements, a program code is developed that controls sound generation and the recording of signals. The code includes an optimization procedure for selecting the voltage on an acoustic driver, providing the required sound pressure level on the face of the sample at different frequencies. The geometry of acoustic liner samples and specifics of synchronous impedance measurements by the aforementioned methods are considered. Experiments are performed at sound pressure levels from 100 to 150 dB in the frequency range of 500–3500 Hz. A comparative analysis of semi-empirical models with the experimental results at different sound pressure levels is carried out. Full article

Acoustic materials are widely used for improving interior acoustics based on their sound absorptive or sound diffusive properties. However, common acoustic materials only offer limited options for customizable geometrical features, performance, and aesthetics. This paper focuses on the sound absorption performance of highly customizable 3D-printed Hybrid Acoustic Materials (HAMs) by means of parametric stepped thickness, which is used for sound absorption and diffusion. HAMs were parametrically designed and produced using computational design, 3D-printing technology, and feedstock material with adjustable porosity, allowing for the advanced control of acoustic performance through geometry-related sound absorbing/diffusing strategies. The proposed design methodology paves the way to a customizable large-scale cumulative acoustic performance by varying the parametric stepped thickness. The present study explores the challenges posed by the testing of the sound absorption performance of HAMs in an impedance tube. The representativeness of the test samples (i.e., cylindrical sections) with respect to the original (i.e., rectangular) panel samples is contextually limited by the respective impedance tube’s geometrical features (i.e., cylindrical cross-section) and dimensional requirements (i.e., diameter size). To this aim, an interlaboratory comparison was carried out by testing the normal incidence sound absorption of ten samples in two independent laboratories with two different impedance tubes. The results obtained demonstrate a good level of agreement, with HAMs performing better at lower frequencies than expected and behaving like Helmholtz absorbers, as well as demonstrating a frequency shift pattern related to superficial geometric features. Full article

The behavioural, physiological, and energetic repercussions for wildlife that result from changes in their soundscapes are increasingly being realized. To understand the effects of changing acoustic landscapes, we first must establish the importance of the acoustic sense for species to transfer information between the environment, con- and heterospecifics, and a receiver, and the functional role of calling in behaviours such as foraging, navigation, mate attraction, and weaning. This review begins with a discussion of the use of calling and the acquisition of the vocal repertoire, before providing examples from multiple taxa on the functional applications of signals and communication. The acoustic sensory mode adds to, if not being inherent in, many critical life history stages over a range of species. The potential effects on an animal resulting from a change in its perceived soundscape and disturbance on its acoustics use is outlined. This can then be used to consider the implications of an altered acoustic niche or active space in the success and survival of an individual or species. Furthermore, we discuss briefly metrics that could be used to understand the implications of these changes, or could be used to guide mitigation action to lessen the impact. Full article

Objective speech intelligibility estimations undertaken in natural acoustics speech communications (NAS) scenarios require the utilization of a speech source that approximates the acoustic characteristics of a human talker. Only a limited number of special speech sources that conform to the specifications in the relevant guidelines are available in the market; however, they can be deemed expensive by professional practitioners and other users. Non-special and affordable loudspeakers are often used in NAS investigations in place of standardized special speech sources without the knowledge of their suitability and results validity. This study aims to examine the suitability of a range of representative common and affordable non-special loudspeakers as a potential alternative to standardized speech sources in NAS indicative or pilot investigations. Frequency response and Speech Transmission Index Public Address (STIPA) experimental results obtained from a reference standardized speech source were compared against results from various non-special loudspeakers measured utilizing diverse and real-world representative combinations of NAS acoustic conditions under controlled laboratory conditions. STIPA mean absolute errors for the alternative speech sources were generally lower than the STIPA method uncertainty and one Just Noticeable Difference (0.03 STI). The findings of this study will inform practitioners of the suitability of affordable loudspeakers when standardized special test loudspeakers are not available. Full article

An acoustoelectric approach to neuron function is proposed that combines aspects of the widely accepted electrical-circuit-based Hodgkin–Huxley model for the generation and propagation of action potentials via electric polarization with mechanical models based on propagation via capillary waves. Explaining measured velocities of action potentials quantitatively, it also predicts the electrical tunability of highly anisotropic polarization packages that surf on the dynamic mechanical force field deforming the neuron membrane. It relies substantially on the local motion of dipoles formed by excess charges close to the inside surface of the neuron membrane, which in turn are anisotropically screened by water molecules in their hydration shell, thus modulating the strong electric field at the interface. As demonstrated on acoustic resonators of suspended nanowires fabricated out of amorphous dipolar silicon nitride, high electric fields combined with predominantly axial-strain modulation can cause transverse acoustoelectric polarization waves that propagate soliton-like with extremely low loss. In neurons, the modulation of electric polarization is confined in the nanometer-thin skin of a high electric field inside the neuron membrane and propagates phase-coherent along the axon as a lowest-order one-dimensional breathing mode, similar to transverse polarization pulses studied in nanowire resonators. Some experiments for the further manifestation of the model as well as topological protection of such breathing-mode polarization waves are discussed. Full article

Many acoustic studies have been carried out in the Italian theatres built during the 17th and 18th centuries. Along with the development of technology, acoustic measurements become increasingly more accurate, able to capture the faithful acoustic conditions of these cultural heritage buildings that are considered icons for representing the house of sound. Although considered controversial for their innovative geometry and shape, the plan layouts proposed by the architect Antonio Galli Bibiena for the theatres placed in Bologna and Mantua were remarkable and appreciated by the audience given the florid artistical program run over the seasons. Site were undertaken in order to analyse the acoustic response of the main halls. From the recorded impulse response, both monoaural and binaural acoustic parameters were compared between the two theatres, where the analysis separately considered the stalls and balconies. The historical background of the selected theatres was detailed to understand the acoustic behaviour of the main halls. Full article

In the approaches to elastography, two mathematical operations have been frequently applied to improve the final estimate of shear wave speed and shear modulus of tissues. The vector curl operator can separate out the transverse component of a complicated displacement field, and directional filters can separate distinct orientations of wave propagation. However, there are practical limitations that can prevent the intended improvement in elastography estimates. Some simple configurations of wavefields relevant to elastography are examined against theoretical models within the semi-infinite elastic medium and guided waves in a bounded medium. The Miller–Pursey solutions in simplified form are examined for the semi-infinite medium and the Lamb wave symmetric form is considered for the guided wave structure. In both cases, we examine simple but practical wave combinations that can prevent the curl and directional filter operations from directly providing an improved measure of shear wave speed and shear modulus. Additional factors including signal-to-noise and the support of filters also restrict the applicability of these strategies for improving elastographic measures. Thus, some implementations of shear wave excitations applied to the body and to bounded structures within the body are shown to involve waves that are not easily resolved by the vector curl operator and directional filters. These limitations may be overcome by more advanced strategies or simple improvements in baseline parameters including the size of the region of interest and the number of shear waves propagated within. Full article

Typically, background noise of different types and levels is present during the measurement of the impulse response in spaces. The two methods that are, in practice, most frequently used in the measurement of the impulse response, are the exponential sine sweep (ESS), and the maximum length sequence (MLS). This study’s objective was to estimate the impact of background noise (white noise, tonal noise) on the acoustic parameters (T₃₀, EDT, C₈₀, and D₅₀) for ESS and MLS measurements, by introducing artificial background noise, employing an external sound source. For this purpose, measurements were performed with varying levels of external noise (in steps of 2 dB), and the effect was assessed, using the relative error compared to measurements without artificial background noise. According to the findings for white noise (as background noise), in the case of T₃₀ and EDT, the difference between the two methods, as well as the relative error, for the initial levels of added background noise, was small. However, for higher levels of added background noise, there was a sharp increase in the relative error, which was greater for the ESS method, both for T₃₀ and EDT. Regarding C₈₀ and D₅₀, while initially the differences between the ESS and MLS methods were small, cumulatively, as the background noise increased, the relative error increased for both methods, with the ESS method showing the largest error. In the case of tonal noise (as background noise), the results were consistent with those observed in the case of white noise. The study’s findings contribute to a better understanding of the ESS and MLS methods, and suggest the expected relative error of acoustic parameters when various types and levels of background noise are present. Additionally, the study suggests, based on background noise and level, the optimum method to conduct impulse response measurements. Full article

This study aimed to establish and verify the validity of an acoustic simulation method during sustained phonation of the Japanese vowels /i/ and /u/. The study participants were six healthy adults. First, vocal tract models were constructed based on computed tomography (CT) data, such as the range from the frontal sinus to the glottis, during sustained phonation of /i/ and /u/. To imitate the trachea, after being virtually extended by 12 cm, cylindrical shapes were then added to the vocal tract models between the tracheal bifurcation and the lower part of the glottis. Next, the boundary element method and the Kirchhoff–Helmholtz integral equation were used for discretization and to represent the wave equation for sound propagation, respectively. As a result, the relative discrimination thresholds of the vowel formant frequencies for /i/ and /u/ against actual voice were 1.1–10.2% and 0.4–9.3% for the first formant and 3.9–7.5% and 5.0–12.5% for the second formant, respectively. In the vocal tract model with nasal coupling, a pole–zero pair was observed at around 500 Hz, and for both /i/ and /u/, a pole–zero pair was observed at around 1000 Hz regardless of the presence or absence of nasal coupling. Therefore, the boundary element method, which produces solutions by analysis of boundary problems rather than three-dimensional aspects, was thought to be effective for simulating the Japanese vowels /i/ and /u/ with high validity for the vocal tract models encompassing a wide range, from the frontal sinuses to the trachea, constructed from CT data obtained during sustained phonation. Full article

The use of a filter bank of IIR filters for the spectral decomposition and analysis of signals has been popular for many years. As such, a new filter-bank resonator-based structure, representing an extremely hardware-efficient structure, has received a good deal of attention. Recently, multiple-resonator (MR)-based and general cascaded-resonator (CR)-based filters have been proposed. In comparison to single-resonator-based analyzers, analyzers with a higher multiplicity of resonators in the cascade provide lower side lobes and a higher attenuation in stopbands. In previous works, it was shown that the CR-based filter bank with infinite impulse response (IIR) filters, which is numerically more efficient than one with finite impulse response (FIR) filters, is suitable for dynamic harmonic analysis. This paper uses the same approach to design complex digital filter banks. In the previous case, the optimization task referred to the frequency responses of harmonic filters. In this work, the harmonic filters of the mother filter bank are reshaped so that the frequency response of the sum (or difference, depending on the parity of the number of resonators in the cascade) of two adjacent harmonic filters is optimized. This way, an online adaptive filter base can be obtained. The bandwidth of the filters in the designed filter bank can be simply changed online by adding or omitting the output signals of the corresponding harmonics of the mother filter. Full article

Computing the backscattering of harmonic acoustic waves from underwater elastic targets of arbitrary shapes is a challenging problem of considerable practical significance. The finite element method is well suited for the discretization of the target, while the boundary element method addresses the radiation boundary condition at infinity. A disadvantage of the boundary integral method is that it yields non-unique solutions at certain wavenumbers. This failure is associated with the existence of eigensolutions of the Helmholtz equation in the interior of the complement of the fluid domain (acoustic modes). The combined Helmholtz integral equation formulation (CHIEF) credited to Schenk is employed to combine the surface Helmholtz boundary integral with equations of the interior Helmholtz relation written down at selected points within the cavity of the scatterer (i.e., in the complement of the fluid domain).The difficulty associated with this approach has always been the lack of guidance on the necessary number of interior points and on their locations. The solution to this problem proposed here is to compute the acoustic modes using the finite element method to complement of the fluid domain and to identify locations of the peaks.This novel approach aids the decision as to how many points should be employed and where they should be located. Our numerical experiments demonstrate the robustness of the proposed automatic selection of the CHIEF points’ numbers and locations. Full article

A numerically efficient technique is presented for computing the backscattered fields from two spherical targets embedded in an underwater sediment. The bottom is assumed to be a homogeneous liquid attenuating half-space. The transmitter/receiver is located in a homogeneous water half-space. The distances between the transmitter/receiver and objects of interest are supposed to be large compared to the acoustic wavelengths in water and seabed. In simulations, the spherical scatterers of the same radius are assumed to be acoustically rigid. The interactions between two spheres are not taken into account because of the strong attenuation in the bottom. The scattering from one sphere in a wide frequency range is determined using the Hackman and Sammelmann’s general approach. The arising scattering coefficients of the sphere are evaluated using the steepest descent method. The obtained asymptotic expressions for the scattering coefficients essentially allowed to decrease a number of summands in the formula for the form-function of the backscattered acoustic field. Full article

The frequency range of the leak noise in buried water pipes, measured using acoustic correlators, depends significantly on the type of pipe and its location as well as the type of sensors used. Having a rough idea of this frequency range can be beneficial for operators prior to conducting tests; however, there is currently no method of predicting it except through practical experience, and no model-based approach yet exists. This issue is addressed in the present paper by using a concise and relatively simple analytical model of the water-pipe–soil system combined with the sensors’ frequency response. The influence of the various physical parameters of the system, such as the pipe and soil properties and the sensor type, on the cross-power spectral density (CPSD) of leak noise signals and, furthermore, the frequency range are investigated. The main factors that affect the bandwidth are the distance between the sensors, wave speed of the predominantly fluid-borne wave in the pipe and the attenuation of this wave. It is shown that the external medium has a profound effect on the propagation and, in turn, on the bandwidth. The approach to predicting this bandwidth is validated using experimental data from three different test sites. Full article

In this paper, an experimental methodology to characterize the noise paths in a washing machine with a horizontal axis was developed. The noise paths considered in this research were the noise that escapes through holes, the non-resonant path through the panels, and the noise radiated by the panels of the cabinet. The characterization method was based on several sound intensity measurements on the outside panels of the washing machine. In addition to these measurements, characterization of the radiation factor was performed by applying a method that relates intensity and vibration measurements while the structure of the washing machine is excited using a shaker. Applying the methodology to a washing machine, the main transmission path of the noise along the frequency domain where this home appliance has its highest values was identified. This methodology can provide the manufacturer with a guide to improve the acoustic performance of washing machines by applying noise control solutions in the noise path depending on the frequency domain. Full article