Geomatics

The volcanic Kerguelen Islands are formed on one of the world’s largest submarine plateaus. Located in the remote segment of the southern Indian Ocean close to Antarctica, the Kerguelen Plateau is notable for a complex tectonic origin and geologic formation related to the Cretaceous history of the continents. This is reflected in the varying age of the oceanic crust adjacent to the plateau and the highly heterogeneous bathymetry of the Kerguelen Plateau, with seafloor structure differing for the southern and northern segments. Remote sensing data derived from marine gravity and satellite radar altimetry surveys serve as an important source of information for mapping complex seafloor features. This study incorporates geospatial information from NOAA, EMAG2, WDMAM, ETOPO1, and EGM96 datasets to refine the extent and distribution of the extracted seafloor features. The cartographic joint analysis of topography, magnetic anomalies, tectonic and gravity grids is based on the integrated mapping performed using the Generic Mapping Tools (GMT) programming suite. Mapping of the submerged features (Broken Ridge, Crozet Islands, seafloor fabric, orientation, and frequency of magnetic anomalies) enables analysis of their correspondence with free-air gravity and magnetic anomalies, geodynamic setting, and seabed structure in the southwest Indian Ocean. The results show that integrating the datasets using advanced cartographic scripting language improves identification and visualization of the seabed objects. The results include 11 new maps of the region covering the Kerguelen Plateau and southwest Indian Ocean. This study contributes to increasing the knowledge of the seafloor structure in the French Southern and Antarctic Lands. Full article

During the past few decades, remote sensing has been established as an innovative, effective and cost-efficient option for the provision of high-quality information concerning infrastructure to governments or decision makers in order to update their plans and/or take actions towards the mitigation of the infrastructure risk. Meanwhile, climate change has emerged as a serious global challenge and hence there is an urgent need to develop reliable and cost-efficient infrastructure monitoring solutions. In this framework, the current study conducts a comprehensive review concerning the use of different remote-sensing sensors for the monitoring of multiple types of infrastructure including roads and railways, dams, bridges, archaeological sites and buildings. The aim of this contribution is to identify the best practices and processing methodologies for the comprehensive monitoring of critical national infrastructure falling under the research project named “PROION”. In light of this, the review summarizes the wide variety of approaches that have been utilized for the monitoring of infrastructure and are based on the collection of remote-sensing data, acquired using the global navigation satellite system (GNSS), synthetic aperture radar (SAR), light detection and ranging (LiDAR) and unmanned aerial vehicles (UAV) sensors. Moreover, great emphasis is given to the contribution of the state-of-the-art soft computing methods throughout infrastructure monitoring aiming to increase the automation of the procedure. The statistical analysis of the reviewing publications revealed that SARs and LiDARs are the prevalent remote-sensing sensors used in infrastructure monitoring concepts, while regarding the type of infrastructure, research is orientated onto transportation networks (road and railway) and bridges. Added to this, deep learning-, fuzzy logic- and expert-based approaches have gained ground in the field of infrastructure monitoring over the past few years. Full article

Sediment Barriers (SBs) are crucial for effective erosion control, and understanding their capacities and limitations is essential for environmental protection. This study compares the accuracy and effectiveness of Terrestrial Laser Scanning (TLS) and Robotic Total Station (RTS) techniques for quantifying sediment retention in SBs. To achieve this, erosion tests were conducted in a full-scale testing apparatus with TLS and RTS methods to collect morphological data of sediment retention surfaces before and after each experiment. The acquired datasets were processed and integrated into a Building Information Modeling (BIM) platform to create Digital Elevation Models (DEMs). These were then used to calculate the volume of accumulated sediment upstream of the SB system. The results indicated that TLS and RTS techniques could effectively measure sediment retention in a full-scale testing environment. However, TLS proved to be more accurate, exhibiting a standard deviation of 0.41 ft³ in contrast to 1.94 ft³ for RTS and more efficient, requiring approximately 15% to 50% less time per test than RTS. The main conclusions of this study highlight the benefits of using TLS over RTS for sediment retention measurement and provide valuable insights for improving erosion control strategies and sediment barrier design. Full article

Invasive alien plants (IAPs) pose a serious threat to biodiversity, agriculture, health, and economies globally. Accurate mapping of IAPs is crucial for their management, to mitigate their impacts and prevent further spread where possible. Remote sensing has become a valuable tool in detecting IAPs, especially with freely available data such as Sentinel-2 satellite imagery. Yet, remote sensing methods to map herbaceous IAPs, which tend to be more difficult to detect, particularly in shrubland Mediterranean-type ecosystems, are still limited. There is a growing need to detect herbaceous IAPs at a large scale for monitoring and management; however, for countries or organizations with limited budgets, this is often not feasible. To address this, we aimed to develop a classification methodology based on optical satellite data to map herbaceous IAP’s using Echium plantagineum as a case study in the Fynbos Biome of South Africa. We investigate the use of freely available Sentinel-2 data, use the robust non-parametric classifier Random Forest, and identify the most important variables in the classification, all within the cloud-based platform, Google Earth Engine. Findings reveal the importance of the shortwave infrared and red-edge parts of the spectrum and the importance of including vegetation indices in the classification for discriminating E. plantagineum. Here, we demonstrate the potential of Sentinel-2 data, the Random Forest classifier, and Google Earth Engine for mapping herbaceous IAPs in Mediterranean ecosystems. Full article

Sustainable agricultural management requires knowledge of where and when crops are grown, what they are, and for how long. However, such information is not yet available in Nepal. Remote sensing coupled with farmers’ knowledge offers a solution to fill this gap. In this study, we created a high-resolution (10 m) seasonal crop map and cropping pattern in a mountainous area of Nepal through a semi-automatic workflow using Sentinel-2 A/B time-series images coupled with farmer knowledge. We identified agricultural areas through iterative self-organizing data clustering of Sentinel imagery and topographic information using a digital elevation model automatically. This agricultural area was analyzed to develop crop calendars and to track seasonal crop dynamics using rule-based methods. Finally, we computed a pixel-level crop-intensity map. In the end our results were compared to ground-truth data collected in the field and published crop calendars, with an overall accuracy of 88% and kappa coefficient of 0.83. We found variations in crop intensity and seasonal crop extension across the study area, with higher intensity in plain areas with irrigation facilities and longer fallow cycles in dry and hilly regions. The semi-automatic workflow was successfully implemented in the heterogeneous topography and is applicable to the diverse topography of the entire country, providing crucial information for mapping and monitoring crops that is very useful for the formulation of strategic agricultural plans and food security in Nepal. Full article

Mapping the seafloor in the deep ocean is currently performed using sonar systems on surface vessels (low-resolution maps) or undersea vessels (high-resolution maps). Surface-based mapping can cover a much wider search area and is not burdened by the complex logistics required for deploying undersea vessels. However, practical size constraints for a towbody or hull-mounted sonar array result in limits in beamforming and imaging resolution. For cost-effective high-resolution mapping of the deep ocean floor from the surface, a mobile wide-aperture sparse array with subarrays distributed across multiple autonomous surface vessels (ASVs) has been designed. Such a system could enable a surface-based sensor to cover a wide area while achieving high-resolution bathymetry, with resolution cells on the order of 1 m² at a 6 km depth. For coherent 3D imaging, such a system must dynamically track the precise relative position of each boat’s sonar subarray through ocean-induced motions, estimate water column and bottom reflection properties, and mitigate interference from the array sidelobes. Sea testing of this core sparse acoustic array technology has been conducted, and planning is underway for relative navigation testing with ASVs capable of hosting an acoustic subarray. Full article

Increased availability of QL1/QL2 Lidar terrain data has resulted in large datasets, often including large quantities of redundant points. Because of these large memory requirements, practitioners often use decimation to reduce the number of points used to create models. This paper introduces a novel approach to improve decimation, thereby reducing the total count of ground points in a Lidar dataset while retaining more accuracy than Random Decimation. This reduction improves efficiency of downstream processes while maintaining output quality nearer to the undecimated dataset. Points are selected for retention based on their discrete curvature values computed from the mesh geometry of the TIN model of the points. Points with higher curvature values are preferred for retention in the resulting point cloud. We call this technique Curvature Weighted Decimation (CWD). We implement CWD in a new free, open-source software tool, CogoDN, which is also introduced in this paper. We evaluate the effectiveness of CWD against Random Decimation by comparing the resulting introduced error values for the two kinds of decimation over multiple decimation percentages, multiple statistical types, and multiple terrain types. The results show that CWD reduces introduced error values over Random Decimation when 15 to 50% of the points are retained. Full article

Accurate mapping of selective logging (SL) serves as the foundation for additional research on forest restoration and regeneration, species diversification and distribution, and ecosystem dynamics, among other applications. This study aimed to model canopy gaps created by illegal logging of Ocotea usambarensis in Mt. Kenya Forest Reserve (MKFR). A texture-spectral analysis approach was applied to exploit the potential of WorldView-3 (WV-3) multispectral imagery. First, texture properties were explored in the sub-band images using fused grey-level co-occurrence matrix (GLCM)- and local binary pattern (LBP)-based texture feature extraction. Second, the texture features were fused with colour using the multivariate local binary pattern (MLBP) model. The G-statistic and Euclidean distance similarity measures were applied to increase accuracy. The random forest (RF) and support vector machine (SVM) were used to identify and classify distinctive features in the texture and spectral domains of the WV-3 dataset. The variable importance measurement in RF ranked the relative influence of sets of variables in the classification models. Overall accuracy (OA) scores for the respective MLBP models were in the range of 80–95.1%. The respective user’s accuracy (UA) and producer’s accuracy (PA) for the univariate LBP and MLBP models were in the range of 67–75% and 77–100%, respectively. Full article

With more than 300 years of existence, Shom is the oldest active hydrographic service in the world. Compiling and deconflicting this much history automatically is a real challenge. This article will present the types of data Shom has to manipulate and the different steps of the workflow that allows Shom to compile over 300 years of bathymetric knowledge. The Téthys project for Shom will be presented in detail. The implementation of this type of process is a scientific, algorithmic, and infrastructure challenge. Full article

Google Earth Engine has deeply changed the way in which Earth observation data are processed, allowing the analysis of wide areas in a faster and more efficient way than ever before. Since its inception, many functions have been implemented by a rapidly expanding community, but none so far has focused on the computation of phenological metrics in mountain areas with high-resolution data. This work aimed to fill this gap by developing an open-source Google Earth Engine algorithm to map phenological metrics (PMs) such as the Start of Season, End of Season, and Length of Season and detect the Peak of Season in mountain areas worldwide using high-resolution free satellite data from the Landsat collection and Sentinel-2. The script was tested considering the entire Alpine chain. The validation was performed by the cross-computation of PMs using the R package greenbrown, which permits land surface phenology and trend analysis, and the Moderate-Resolution Imaging Spectroradiometer (MODIS) in homogeneous quote and land cover alpine landscapes. MAE and RMSE were computed. Therefore, this algorithm permits one to compute with a certain robustness PMs retrieved from higher-resolution free EO data from GEE in mountain areas worldwide. Full article

Understanding long-term land use/land cover (LULC) change patterns is vital to implementing policies for effective environmental management practices and sustainable land use. This study assessed patterns of change in LULC in the Vaal Dam Catchment area, one of the most critically important areas in South Africa, since it contributes a vast portion of water to the Vaal Dam Reservoir. The reservoir has been used to supply water to about 13 million inhabitants in Gauteng province and its surrounding areas. Multi-temporal Landsat imagery series were used to map LULC changes between 1986 and 2021. The LULC classification was performed by applying the random forest (RF) algorithm to the Landsat data. The change-detection analysis showed grassland being the dominant land cover type (ranging from 52% to 57% of the study area) during the entire period. The second most dominant land cover type was agricultural land, which included cleared fields, while cultivated land covered around 41% of the study area. Other land use types covering small portions of the study area included settlements, mining activities, water bodies and woody vegetation. Time series analysis showed patterns of increasing and decreasing changes for all land cover types, except in the settlement class, which showed continuous increase owing to population growth. From the study results, the settlement class increased considerably for 1986–1993, 1993–2000, 2000–2007, 2007–2014 and 2014–2021 by 712.64 ha (0.02%), 10245.94 ha (0.26%), 3736.62 ha (0.1%), 1872.09 ha (0.05%) and 3801.06 ha (0.1%), respectively. This study highlights the importance of using remote sensing techniques in detecting LULC changes in this vitally important catchment. Full article

To monitor the changes in the landscape, and to relate these to ecological processes, we need robust and reproducible methods for quantifying the changes in landscape patterns. The main aim of this study is to present, exemplify and discuss a gradient-based index of land use intensity. This index can easily be calculated from spatial data that are available for most areas and may therefore have a wide applicability. Further, the index is adapted for use based on official data sets and can thus be used directly in decision-making at different levels. The index in its basic form consists of two parts where the first is based on the data of buildings and roads and the second of infrastructure land cover. We compared the index with two frequently used ‘wilderness indices’ in Norway called INON and the Human Footprint Index. Our index captures important elements of infrastructure in more detailed scales than the other indices. A particularly attractive feature of the index is that it is based on map databases that are updated regularly. The index has the potential to serve as an important tool in land use planning as well as a basis for monitoring, the assessment of ecological state and ecological integrity and for ecological accounting as well as strategic environmental assessments. Full article

In ship detection by means of Polarimetric SAR imagery, a very promising feature is the characterization of the pixels of the ship based on the elementary scattering mechanisms that can be extracted using different decomposition algorithms. Elementary scattering mechanisms provide information regarding the physical, electrical and geometrical properties of the scatterers in each Polarimetric SAR pixel. In this work, the newly established algorithm of the Double Scatterer Model is applied to interpret each pixel of the Polarimetric SAR image with the contributions of two elementary scattering mechanisms, namely, primary and secondary. The main idea is to construct a binary image while preserving the rich information content in order to proceed in simple and fast image processing for target detection. The present algorithm is applied to datasets with different inherent characteristics acquired by Radarsat-2 and ALOS-PALSAR. The results presented by this new perspective on ship monitoring are remarkable. Full article

Night-time light (NTL) data have been widely used as a remote proxy for the economic performance of regions. The use of these data is more advantageous than the traditional census approach is due to its timeliness, low cost, and comparability between regions and countries. Several recent studies have explored monthly NTL composites produced by the Visible Infrared Imaging Radiometer Suite (VIIRS) and revealed a dimming of the light in some countries during the national lockdowns due to the COVID-19 pandemic. Here, we explicitly tested the extent to which the observed decrease in the amount of NTL is associated with the economic recession at the subnational level. Specifically, we explore how the association between Gross Domestic Product (GDP) and the amount of NTL is modulated by the pandemic and whether NTL data can still serve as a sufficiently reliable proxy for the economic performance of regions even during stressful pandemic periods. For this reason, we use the states of the US and quarterly periods within 2014–2021 as a case study. We start with building a linear mixed effects model linking the state-level quarterly GDPs with the corresponding pre-processed NTL data, additionally controlling only for a long-term trends and seasonal fluctuations. We intentionally do not include other socio-economic predictors, such as population density and structure, in the model, aiming to observe the ‘pure’ explanatory potential of NTL. As it is built only for the pre-COVID-19 period, this model demonstrates a rather good performance, with R² = 0.60, while its extension across the whole period (2014–2021) leads to a considerable worsening of this (R² = 0.42), suggesting that not accounting for the COVID-19 phenomenon substantially weakens the ‘natural’ GDP–NTL association. At the same time, the model’s enrichment with COVID-19 dummies restores the model fit to R² = 0.62. As a plausible application, we estimated the state-level economic losses by comparing actual GDPs in the pandemic period with the corresponding predictions generated by the pre-COVID-19 model. The states’ vulnerability to the crisis varied from ~8 to ~18% (measured as a fraction of the pre-pandemic GDP level in the 4th quarter of 2019), with the largest losses being observed in states with a relatively low pre-pandemic GDP per capita, a low number of remote jobs, and a higher minority ratio. Full article

Deep learning approaches are gaining popularity in image feature analysis and in attaining state-of-the-art performances in scene classification of remote sensing imagery. This article presents a comprehensive review of the developments of various computer vision methods in remote sensing. There is currently an increase of remote sensing datasets with diverse scene semantics; this renders computer vision methods challenging to characterize the scene images for accurate scene classification effectively. This paper presents technology breakthroughs in deep learning and discusses their artificial intelligence open-source software implementation framework capabilities. Further, this paper discusses the open gaps/opportunities that need to be addressed by remote sensing communities. Full article

Wheat is an important staple crop in the global food chain. The production of wheat in many regions is constrained by the lack of use of advanced technologies for wheat monitoring. Unmanned Aerial Vehicles (UAVs) is an important platform in remote sensing for providing near real-time farm-scale information. This information aids in making recommendations for monitoring and improving crop management to ensure food security. This study appraised global scientific research trends on wheat and UAV studies between 2005 and 2021, using a bibliometric method. The 398 published documents were mined from Web of Science, Scopus, and Dimensions. Results showed that an annual growth rate of 23.94% indicates an increase of global research based on wheat and UAVs for the surveyed period. The results revealed that China and USA were ranked as the top most productive countries, and thus their dominance in UAVs extensive usage and research developments for wheat monitoring during the study period. Additionally, results showed a low countries research collaboration prevalent trend, with only China and Australia managing multiple country publications. Thus, most of the wheat- and UAV-related studies were based on intra-country publications. Moreover, the results showed top publishing journals, top cited documents, Zipf’s law authors keywords co-occurrence network, thematic evolution, and spatial distribution map with the lack of research outputs from Southern Hemisphere. The findings also show that “UAV” is fundamental in all keywords with the largest significant appearance in the field. This connotes that UAV efficiency was important for most studies that were monitoring wheat and provided vital information on spatiotemporal changes and variability for crop management. Findings from this study may be useful in policy-making decisions related to the adoption and subsidizing of UAV operations for different crop management strategies designed to enhance crop yield and the direction of future studies. Full article

Landform classification is crucial for a host of applications that include geomorphological, soil mapping, radiative and gravity-controlled processes. Due to the complexity and rapid developments in the field of landform delineation, this study provides a scoping review to identify trends in the field. The review is premised on the PRISMA standard and is aimed to respond to the research questions pertaining to the global distribution of landform studies, methods used, datasets, analysis units and validation techniques. The articles were screened based on relevance and subject matter of which a total of 59 articles were selected for a full review. The parameters relating to where studies were conducted, datasets, methods of analysis, units of analysis, scale and validation approaches were collated and summarized. The study found that studies were predominantly conducted in Europe, South and East Asia and North America. Not many studies were found that were conducted in South America and the African region. The review revealed that locally sourced, very high-resolution digital elevation model ( DEM) products were becoming more readily available and employed for landform classification research. Of the globally available DEM sources, the SRTM still remains the most commonly used dataset in the field. Most landform delineation studies are based on expert knowledge. While object-based analysis is gaining momentum recently, pixel-based analysis is common and is also growing. Whereas validation techniques appeared to be mainly based on expert knowledge, most studies did not report on validation techniques. These results suggest that a systematic review of landform delineation may be necessary. Other aspects that may require investigation include a comparison of different DEMs for landform delineation, exploring more object-based studies, probing the value of quantitative validation approaches and data-driven analysis methods. Full article

Fruit-tree crops generate food and income for local households and contribute to South Africa’s gross domestic product. Timely and accurate phenotyping of fruit-tree crops is essential for innovating and achieving precision agriculture in the horticulture industry. Traditional methods for fruit-tree crop classification are time-consuming, costly, and often impossible to use for mapping heterogeneous horticulture systems. The application of remote sensing in smallholder agricultural landscapes is more promising. However, intercropping systems coupled with the presence of dispersed small agricultural fields that are characterized by common and uncommon crop types result in imbalanced samples, which may limit conventionally applied classification methods for phenotyping. This study assessed the influence of balanced and imbalanced multi-class distribution and data-sampling techniques on fruit-tree crop detection accuracy. Seven data samples were used as input to adaptive boosting (AdaBoost), gradient boosting (GB), random forest (RF), support vector machine (SVM), and eXtreme gradient boost (XGBoost) machine learning algorithms. A pixel-based approach was applied using Sentinel-2 (S2). The SVM algorithm produced the highest classification accuracy of 71%, compared with AdaBoost (67%), RF (65%), XGBoost (63%), and GB (62%), respectively. Individually, the majority of the crop types were classified with an F1 score of between 60% and 100%. In addition, the study assessed the effect of size and ratio of class imbalance in the training datasets on algorithms’ sensitiveness and stability. The results show that the highest classification accuracy of 71% could be achieved from an imbalanced training dataset containing only 60% of the original dataset. The results also showed that S2 data could be successfully used to map fruit-tree crops and provide valuable information for subtropical crop management and precision agriculture in heterogeneous horticultural landscapes. Full article