Heritage

UNESCO Global Geoparks are recognised in the scientific community for their exceptional geological significance, but their potential to embrace and preserve cultural heritage sites is underestimated. This study delves into a pioneering approach within the Sesia Val Grande UNESCO Global Geopark (NW Italy), examining the integration of culturally significant sites into conservation and promotion strategies. To achieve a successful integration, we adapted a methodology used for the identification and assessment of geosites, incorporating the criteria of cultural significance, to assess the value of 10 cultural sites within the geopark and compare the results with the assessment values of 10 geosites. Moreover, we submitted survey questionnaires to geopark tourists to understand their interest in visiting both geosites and cultural sites. The findings reveal the remarkable scientific, educational, and touristic values of these cultural sites, which constitute an important resource for the geopark, to be enhanced and protected together with the geosites. Interestingly, the higher scientific value of cultural sites corresponds to increased visitor interest, which is in contrast to the trend observed for geosites. Through this unified approach, the monitoring of cultural heritage within the geopark is simplified and improved, enabling a comprehensive inventory and efficient administration. Moreover, by aligning visitor interests with scientific value, the Sesia Val Grande Geopark can enhance conservation and sustainable tourism efforts. Full article

The need to improve the energy performance of European buildings is beyond all doubt, as indicated by the different regulatory determinations on energy and climate change adopted by different public administrations in recent years. The primary actions have focused on improving the thermal enclosure of buildings; the placement of new energy-efficient skins on their exterior façades is consequently beginning to deconfigure, distort, homogenize and globalize the city in an alarming manner. In the case of Spain, the lack of a specific regulation on how to proceed when renovating the vast majority of residential buildings without heritage protection is leaving the ultimate decision in the hands of owner associations. It is therefore urgent to endow municipal administrations with a tool enabling them to regulate and control the transformation of a city’s image before it is too late. To that end, a pioneer methodology is proposed to classify the unprotected building stock of a municipality with a view to future renovation actions, depending on the degree of their vulnerability and the greater or lesser need to protect their image and the other pre-existing features. As a theoretical case study to test the proposed methodology, the locality of Errenteria, Spain, was chosen, demonstrating that it is an effective tool easy to apply in any city nationwide, regardless of the respective location, size and management capacity. Full article

Cultural heritage objects present a special set of challenges for chemical analysis. Often micro-sampling or even contacting the object is deemed an unacceptable risk to the object. This study examined if specular reflection FTIR, a non-sampling and non-contact analytical technique, can provide insight into chemical composition of the layered coatings on Frédéric Flachéron’s paper negatives (1848–1852) in the Harrison D. Horblit Collection of Early Photography, in Houghton Library, at Harvard University. Specular reflection FTIR data confirmed the identification of beeswax and sandarac as the transparentizing media on Flachéron’s paper negatives, as previously published by Lee Ann Daffner. However, specular reflection FTIR analysis also indicated that some negatives had additional localized coatings of orange shellac in specific areas of the images. To understand why Flachéron retouched his negatives with orange shellac, modern experimental replications of the paper negative process were performed. Through modern experimentation with the paper negative technique, it was found that Flachéron’s coatings of shellac served as an integral part of his image-altering technique. The color of the orange shellac subtly alters contrast and density, but it does not mask an area the way an opaque watercolor or highly pigmented paint might. The fine adjustments to the negatives with orange shellac were an attempt to perfect the contrast in the print, and better render depth and detail. These discoveries add to a growing body of recent research that points to the historic and art historic importance of negatives and coatings in photography. The specificity with which specular reflection FTIR was able to nondestructively identify the chemical composition of the local coating, and specifically target the analysis on the areas in which it appeared, allowed for an understanding of Flachéron’s use of local coatings as a retouching method rather than a protective coating. Full article

Design has shaped the world in which we live; it has improved our lives in ways we cannot even begin to imagine. Even if design is everywhere and is the memory of the world, collections associated with it are not usually well-known as design archives which capture spatial and temporal narratives. Saving these types of archives and making them accessible to the public, using them as cultural hubs, might improve our lives thanks to visual literacy, creativity, and innovation. The Arxiu Valencià del Disseny aims to recover, preserve, protect, and disseminate the archival cultural heritage of the Valencian designers. With a collection of more than 150,000 objects, it recovers history and evolution from the applied arts and product design, but with a markedly future-oriented character through the enhancement of the collections and their dissemination thanks to an intelligent computational system featuring cutting-edge technologies in order to prove our understanding of Valencian and European design. The aim of this paper is twofold: first, we introduce the AVD project, an interdisciplinary project that has been recently funded by the Valencian Government in order to preserve and promote the heritage of design archives; second, we introduce a set of interactive tools related to the project, such as the digitisation and cataloguing of the collection, the generation of a Design Memory Archive, advanced searching, and semantically relating the digitised collection of the Arxiu Valencià del Disseny based on data interoperability across its collections and a benchmarking tool for designers. Full article

Ancient manuscripts are precious and fragile objects, preserved in libraries, museums, and archives. Some of them are masterpieces, made with several materials and insights, but generally they are not accessible to wide communities of users. The purpose of this study is to present the preliminary results of the Codex4D project: a holographic showcase, conceived for museums, presenting the first 4D model of an ancient manuscript to the public at the Science Festival in Genoa in 2022. The manuscript, preserved in the Angelica Library in Rome, has been represented in a multidimensional digital model, documenting both its visible and invisible aspects, on the surface and in the stratigraphic layers. We analysed the visitor experience: informal learning, the meaning-making process, interactions between visitors, and gesture-based interaction with the showcase. The methodology used for evaluation is based on four different qualitative methods (grounded theory, narrative inquiry, case study, and digital ethnography). We collected notes from observation, narratives from interviews, and answers from structured interviews. The main findings are patterns of the visitors’ experiences with a digital interactive 4D model of an ancient manuscript, supported by storytelling, and a list of design issues and possible improvements for the next version of the Codex4D holographic showcase. Full article

This paper deals with a metrological and qualitative evaluation of the Artec 3D structured-light scanners: Micro and Space Spider. As part of a larger European project called ITSERR, these scanners are tested to reconstruct small archaeological artefacts, in particular cuneiform tablets with different dimensions. For this reason, Micro and Space Spider are compared in terms of the entire workflow, from preparatory work to post-processing. In this context, three cuneiform replica tablets will serve as examples on which the Artec scanners will have to prove their worth. Metric analyses based on distance maps, RMSe calculations and density analyses will be carried out to understand metrological differences between these tools. The creation of 3D models of cuneiform tablets is the first step in developing a virtual environment suitable for sharing the archaeological collection with collaborators and other users. The inclusion of semantic information through specific ontologies will be the next step in this important project. Full article

Eastern Africa is home to strikingly beautiful landscapes, unique wildlife and exotic cultural heritage that create outstanding tourism appeal. Unfortunately, these attractive features do not always translate to high tourism revenues. This paper focuses on analyzing the relationships between tourism performance indicators—arrivals, revenues and the revenue-based revealed comparative advantage (RCA)—and compare them to the components of destination facilities and endowments measured by the Tourism and Travel Competitiveness Index (TTCI). The analysis concentrates on Ethiopia, Kenya, Uganda and Tanzania, using secondary data from 2005 to 2017. The methodology applies correlation analysis and panel regression. As the results show, the TTCI and RCA are negatively correlated, but the components of the TTCI have different relationships to the RCA. Natural heritage positively influences the RCA, while cultural resources do not. The higher RCA values are also enhanced by better tourism services and better ground travel infrastructure. Similar analyses have been performed for Europe and some Asian countries, but not for Eastern Africa. The novelty of the present research is the fact that natural heritage resources can contribute considerably to tourism revenues, while cultural resources are not utilized to their full potential in terms of tourism success. Full article

Geoheritage requires proper conservation and has significant importance for geoscience education at universities. Furthermore, its related potential needs to be evaluated. This study focuses on two textbook localities (these are parts of larger geosites) from the Cenozoic orogenic belts, namely the Zagros and the Greater Caucasus. The novel, tentatively proposed approach aims at general geological characteristics of the localities, identification of the principal teaching topics and teaching opportunities, and semi-quantitative evaluation of the educational potential on the basis of several objective criteria. The Abmorghan anticline (Zagros, Iran) is suitable for learning about the regional Paleogene stratigraphy, carbonate platform evolution, and karst. The locality of the Skala monocline (Greater Caucasus, Russia) allows the deposition in past tropical conditions and monocline structures to be explained. Both localities can be used for training student skills and challenging their geological thinking. The semi-quantitative evaluation shows that the geoeducational potential of the Abmorghan anticline is advanced and that of the Skala monocline is moderate. The established potential can be exploited by universities, although this requires focusing attention on the other geoheritage sites and special marketing efforts. Full article

In recent years, researchers in the field of natural heritage have intensified their efforts to develop new ways to enhance the promotion and accessibility of natural content in order to attract more audiences using virtual representations of physical objects (digital twins). Therefore, they are increasingly incorporating new technologies and digital tools in their operations since their usage by the general public and in the natural heritage (NH) museums is considered particularly effective. Simultaneously, the increasing quality of the produced digitizations has opened up new opportunities for the exploitation of the outcomes of digitization beyond the initial anticipations. Responding to the growing demand of museum visitors for a personalized digital tour experience, especially amidst the recent COVID-19 pandemic, the v-PalM project aims to develop a digital platform to offer virtual guidance and education services at the Museum of Paleontology and Geology, which is hosted at the National Kapodistrian University of Athens. The development of the platform will be based on collecting data through various methods, including crowdsourcing, innovative information, and communication technologies, taking advantage of content digitization using 3D scanning devices. This paper demonstrates an enhanced methodology for the digitization of paleontological exhibits. The methodology uses photogrammetry and laser scanning methods from various devices, such as drones, laser scanners, and smartphones. These methods create digital twins that are suitable for various scenarios, including research, education, and entertainment. The proposed methodology has been applied to over fifty paleontological museum exhibits of varying sizes and complexities, and the resulting 3D models exhibit high accuracy in both their material and geometric aspects, while they also feature crucial details that assist researchers and the scientific community. Full article

The medieval wall of Jaén is a historical monument that has suffered from the apathy of institutions in recent years, causing its calamitous current status. This study focuses on the previous geomatic tasks developed to obtain a 3D documentation of this site in order to manage future restoration works. The methodology included the integration of data obtained using several geomatic techniques, such as LiDAR and photogrammetry at three scale levels, from the general to the particular. Therefore, data fusion is the main aspect of this methodology, developed in an attempt to take advantage of the benefits of each technique. The application demonstrated the feasibility of using the methodology in order to obtain a complete documentation, including 3D models, orthoimages and DEMs, at several scales with different resolutions and point densities. In addition, we also considered the accuracy of data and products with respect to the project requirements. Another aspect to highlight is the reduction in acquisition time by minimizing the necessity of conducting classic surveying to obtain georeference data. The results show reliable products for supporting restoration tasks and allowing the development of a BIM application to manage them, but also for the dissemination of knowledge regarding this unknown monument. Full article

Because of the possibilities that it opens for a variety of fields and practices, gamification has increasingly garnered significant attention. This has put it at the forefront of many significant debates around its applicability and implications. In the case of its application to cultural heritage, although there is much trailblazing to do, the body of work has been growing and the field is gaining its maturity. As such, this paper aims to take stock of the directions the field has been moving towards—to provide orientation for future work and projects that are yet to be developed. To do this, the paper aims to map out the publications in the field of gamified cultural heritage, by conducting a broader and systematic literature review. The study has found that, with regards to who the main actors with publications in the field are, a prominence of European institutions and networks, namely from Italy, Greece and the United Kingdom, can be observed. Regarding what heritage is being gamified and for what purpose, the study found a prominence of focus on historical, architectural and archeological heritage values and a very significant focus on gamification being used for motivation/engagement and for creativity enhancement. When looking at the gamification design dimensions that are given prevalence, intrinsic motivation seems to be prioritized, and, with regards to the observed target publics, tourists and visitors and seem to prevail in gamified heritage projects, with children as a specific group coming in second. Regarding technologies and tools being used, Mobile Applications, Augmented Reality (AR) and Virtual Reality (VR) are particularly prevalent. Regarding mentioned future orientations, the study found that a vast majority of papers are self-contained, both in scope of work and discussion, with most of those that do mention future directions indicating continuation and/or expansion of their specific project. Full article

The primary purpose of this study is to open the discussion of FAIR principles in Finnish archaeology. This topic has not yet been actively discussed in Finnish archaeology. In this study, we were testing whether adding keywords could increase the reusability of the Register of Ancient Sites, as the reusability level of the current register is low. The case study focuses on creating an overview of the Iron Age sites in the Itä-Häme area. Keywords were added for all of the 585 archaeological sites in the study area, based on field reports and find catalogues. After giving keywords to all of the sites, it was possible to make queries from the register and form a new, more detailed overview of the Iron Age sites in the Itä-Häme area. Our study revealed mistakes and ambiguities in the register, but adding keywords increased its reusability. However, it cannot solve the main issue: basic research has not been carried out extensively enough in Finland. Based on the overview, it can be seen that Itä-Häme was an active and important area in the Iron Age, and an especially meaningful possible new site type was identified; however, more research in this area is needed. Full article

The diffuse data fruition of archaeological hypogeum sites still represents a challenge due to their limited accessibility and their preservation and maintenance issues. This implies that the fruition of these peculiar archaeological sites is often possible through digital reconstructions and interactive web navigation systems. The survey methodologies based on terrestrial laser scanning and photogrammetry allow making accurate and detailed digital reconstructions of these sites that are useful for virtual fruition purposes. In addition, many different systems can be used for remote web navigation and fruition. This work presents a possible solution for the virtual fruition of archaeological hypogea with a multiscale 3D web navigation system based on WebGL open-source technology. The system has been implemented for the Roman hypogeum of Crispia salvia, located in Marsala (southern Italy). The hypogeum belongs to the Archaeological Park of Lilibeo-Marsala and is considered one of the most important archaeological discoveries in this area for its extraordinary frescoes. Public accessibility of this site is limited because it is located outside the boundaries of the Archaeological Park, in the modern town, and covered by a residential building. In this case, the web navigation system adds an important contribution due to the limited real accessibility to the site. This work shows the framework for the construction of the web navigation system, where 3D surveys, digital reconstructions, 3D modeling, and web development are integrated. The choice of using an open-source technology for the web navigation system limits the costs of the process, and, at the same time, grants the web dissemination of site information. Full article

The Brazilian Legal Amazon region is divided into at least 155 ethnic groups and has the largest concentration of Indigenous people globally. It represents one of the most extraordinary levels of human, cultural, and artistic diversity, but its material culture is one of the least well-studied. This is especially true in technical art history and conservation science, largely due to (1) the limited international awareness of the richness of materials and techniques used by these Indigenous people and (2) the limitations of knowledge access for many scientists to literature usually published in Portuguese within social sciences and humanities. One result is that these arts are marginalized within technical art history, conservation, and conservation science. To address this knowledge gap, the authors explore 70 materials—among them pigments, dyes, binding media, and varnishes—used for paint production and coloring processes, including syntheses. The authors facilitate research possibilities within technical art history, conservation, and conservation science by presenting data from historical texts from the 18th and 19th centuries and more recent scientific literature. The work aims to build a more global, inclusive, and decentralized vision of art history and to create a more pluralistic narrative of Indigenous art history from South America. Full article

Many constructions built by ancient civilization hold many mysteries and attract the attention of historians, archaeologists and tourists from all over the world. The most famous and enigmatical among them is the Great (Khufu’s-Cheops’) Pyramid on the Giza plateau in Egypt. The assignment, construction methods and especially the inside structure of the Pyramid have been the cause of heated debate among historians and researchers since ancient times. Unfortunately, not only researchers are interested in ancient structures and excavation sites of archaeological values, but also robbers and illegal seekers of archaeological values. This led to the partial destruction of the Pyramid by the order of the Arab caliph Al-Ma’mun in the 9th century AD. From the middle of the last century, the point of view has prevailed that only non-destructive testing methods are acceptable when examining ancient structures. In the 1960s, a technology was proposed for transilluminating the pyramids of Giza by muons, which are generated by cosmic rays in the Earth’s atmosphere. This method gave promising results. Other means were also proposed, which include radar, as well as gravitational and vibration technologies. However, despite numerous attempts to use them, no significant success or discovery has been achieved. A discussion of these methods, their applications and partial successes is the subject of this article. Full article

The primary objective of this research is to address the research gap in the conservation of heritage buildings in Canada by integrating Historical Building Information Modeling (HBIM) as a tool. The proposed study aims to develop an enhanced framework for the preservation of historical buildings through the utilization of HBIM and 3D-scanning technology. As a result, the research aims to generate a comprehensive database comprising various families of models while also incorporating strategies for point-cloud clustering data. The significance of this research lies in its potential to contribute to the conservation and restoration process of historical buildings. Currently, there are a lack of standardized approaches and comprehensive databases for accurately documenting and reproducing historical buildings. By integrating HBIM and 3D-scanning technology, this research will enable the creation of highly accurate three-dimensional virtual models, consisting of millions of points, which will serve as a comprehensive dataset for the restoration of heritage buildings. The findings of this research will benefit multiple stakeholders. Preservation architects, conservationists, and heritage professionals will gain a valuable tool for documenting and analyzing historical buildings with a high level of precision. The comprehensive database and framework proposed in this study will facilitate decision-making processes during the restoration and preservation phases, ensuring that the original architectural elements and materials are faithfully reproduced. Additionally, policymakers and governmental organizations involved in heritage conservation can use the outcomes of this research to establish standardized guidelines and regulations for the preservation of historical buildings in Canada. Ultimately, the broader community will benefit from the enhanced preservation efforts, as it will contribute to the cultural and historical identity of the nation, fostering a sense of pride and connection to the past. Full article

This paper presents the path of knowledge developed for assessing the structural safety of the Norman-age Pisan Tower, which is mostly incorporated into the Royal Palace in Palermo, Italy. Historical, geomatic, and mechanical investigations were conducted and the most relevant results are herein collected and presented. The research path was addressed to specific tasks: identification of the building, geometric surveys, recognition of the sequence of phases of building transformation, detection of the components of the load-bearing structure, structural diagnostic surveys, and investigation of the subsoil and foundations. The explicit vulnerabilities found were mostly confined to the Piazzi library floor, while implicit vulnerabilities were identified in the presence of false walls and in high loads and fillings on the vaults of the last levels. The results of the analyses allowed the individuation of the confidence factors to use in structural analysis models aimed at the assessment of the seismic safety of the building. Full article

This paper aims to analyze the role of natural heritage cataloging when criminal events challenge natural history museums. This study investigates the rhino horn thefts in Italian natural history museums from 2011 to 2015 to provide a comprehensive framework for these robberies while highlighting the weaknesses and strengths to prevent thefts and safeguard both rhino horns and natural history collections from future targeting. Full article

The present work focuses on the solid modeling of the church of Santa Sofia in Benevento, Italy, and is related to a multidisciplinary research project that involved methods typical to both the humanities and mathematical engineering. Starting from the history of the church and its current configuration, a twofold objective is pursued: to give a brief account of the methodology used to analyze and virtualize the main phases of Santa Sofia and to report on the problem of modeling the church vault complex. Indeed, the 3D modeling of the church presented different levels of difficulty with some parts very easy to draw and others calling for specific geometrical analysis. In particular, to reconstruct the complex system of vaults of the church, a home-made code based on remapping Coons patches was written. The resulting 3D models of the different archeological and architectural phases of Santa Sofia are an example of virtual heritage and, being a digital content, allow for immediate sharing both to the scientific community and to a general and nonexpert audience, keeping in mind that knowledge is the means used to ensure the enhancement and preservation of cultural heritage. Full article