Search Results (2,101)

Pulmonary drug delivery via microspheres has gained growing interest as a noninvasive method for therapy. However, drug delivery through the lungs via inhalation faces great challenges due to the natural defense mechanisms of the respiratory tract, such as the removal or deactivation of drugs. This study aims to develop a natural polymer-based microsphere system with a diameter of around 3 μm for encapsulating pulmonary drugs and facilitating their delivery to the deep lungs. Pectin was chosen as the foundational material due to its biocompatibility and degradability in physiological environments. Electrospray was used to produce the pectin-based hydrogel microspheres, and Design-Expert software was used to optimize the production process for microsphere size and uniformity. The optimized conditions were determined to be as follows: pectin/PEO ratio of 3:1, voltage of 14.4 kV, distance of 18.2 cm, and flow rate of 0.95 mL/h. The stability and responsiveness of the pectin-based hydrogel microspheres can be altered through coatings such as gelatin. Furthermore, the potential of the microspheres for pulmonary drug delivery (i.e., their responsiveness to the deep lung environment) was investigated. Successfully coated microspheres with 0.75% gelatin in 0.3 M mannitol exhibited improved stability while retaining high responsiveness in the simulated lung fluid (Gamble’s solution). A gelatin-coated pectin-based microsphere system was developed, which could potentially be used for targeted drug delivery to reach the deep lungs and rapid release of the drug. Full article

The SEM-EDX method was used to investigate the structure and morphology of organic–inorganic hybrids containing zirconium, boron and phosphorus compounds, synthesized by the sol–gel method. We started by using, for the first time together, zirconyl chloride hexa-hydrate (ZrOCl₂·6H₂O), phenyl phosphinic acid and triethyl borate as precursors and reagents, at different molar ratios. The obtained hybrids showed a very high thermal stability and are not soluble in water or in organic solvents. As a consequence, such hybrid solid materials are suitable for applications at high temperatures. The obtained hybrids have complex 3D structures and form organic–inorganic networks containing Zr-O-Zr, Zr-O-P and Zr-O-B bridges. Such organic–inorganic networks are also expected to form supramolecular structures and to have many potential applications in different fields of great interest such as catalysis, medicine, agriculture, energy storage, fuel cells, sensors, electrochemical devices and supramolecular chemistry. Full article

Multicomponent oxide microspheres with interconnected macroporosity (MICROSCAFS^®) are new materials with great potential as support materials for photocatalysis, optimized for real life applications and for other uses that are still being explored. They are obtained from an adapted sol–gel process combined with phase separation phenomena that occur within the water droplets of an emulsion. We present here a methodology based on cryogenic scanning electron microscopy (cryo-SEM) that allows, with minimal specimen preparation, the direct and in situ visualization of ‘wet’ alkoxide-derived microstructures, for the mechanistic study of the complex process of MICROSCAFS^® generation. It is simultaneously combined with energy dispersive X-ray spectroscopy (EDS) to visualize phase separation phenomena and study the chemical elemental composition at specific regions of the sample and reaction times. Full article

Connective tissue models grown from cell monolayers can be instrumental in a variety of biomedical fields such as drug screening, wound healing, and regenerative engineering. However, while connective tissues contain abundant fibrillar collagen, achieving a sufficient assembly and retention of fibrillar collagen in vitro is challenging. Unlike the dilute cell culture environment, the body’s environment is characterized by a high density of soluble macromolecules (crowding) and macromolecular networks (confinement), which contribute to extracellular matrix (ECM) assembly in vivo. Consequently, macromolecular crowding (MMC) has been successfully used to enhance the processing of type I procollagen, leading to significant increases in fibrillar collagen assembly and accumulation during in vitro culture of a variety of cell types. In this study, we developed a combination approach using a carrageenan hydrogel, which released soluble macromolecules and served as a confinement barrier. We first evaluated the local carrageenan release and then confirmed the effectiveness of this combination approach on collagen accumulation by the human MG-63 bone cell line. Additionally, computational modeling of oxygen and glucose transport within the culture system showed no negative effects of the hydrogel and its releasates on cell viability. Full article

Herein, a green, carbon dioxide-in-water high-internal-phase emulsion (C/W HIPEs) was developed and stabilized with polyvinyl alcohol (PVA) for the formation of chitosan oligosaccharide/poly(acrylamide-co-sodium 4-styrene sulfonate) [COS/P(AM-co-SSS)] monolithic porous hydrogel. The obtained monolith was characterized via FT-IR and SEM. The SEM patterns depicted that the monoliths were interconnected, the void sizes were 78.5 µm, and the interconnected pore throats were 28 μm approximately. Mechanical measurement results indicated that the maximum compress stress of the monolith could reach 334.4 kPa at 90% strain, and it exhibited good mechanical stability. After 200 cycles of compression, it could still recover its original shape without cracking. The obtained COS-based monolith was selected to remove tetracycline (TC) for evaluating the adsorptive features of the interpenetrating pore-containing monolith. The monolithic COS/P(AM-co-SSS) hydrogel behaved with strong antibiotic adsorption capacity (1600.4 mg/g for TC). The adsorption process agreed well with the pseudo-second-order kinetic and Langmuir isothermal models. In addition, the porous monolith had a strong electrostatic force on TC according to the thermodynamic study. This work provides a green route for the development of novel monolithic hydrogels and highlights its potential application in the treatment of antibiotic-containing wastewater. Full article

Hard carbon materials are considered to be the most practical anode materials for sodium ion batteries because of the rich availability of their resources and potentially low cost. Here, the conversion of corn leaf biomass, a largely available agricultural waste, into carbonaceous materials for Na-ion storage application is reported. Thermal analysis investigation determines the presence of exothermic events occurring during the thermal treatment of the biomass. Accordingly, various temperatures of 400, 500, and 600 °C are selected to perform carbonization treatment trials, leading to the formation of various biocarbons. The materials obtained are characterized by a combination of methods, including X-ray diffraction, electron microscopy, surface evaluation, Raman spectroscopy, and electrochemical characterizations. The Na-ion storage performances of these materials are investigated using water-soluble carboxymethyl cellulose binder, highlighting the influence of the carbonization temperature on the electrochemical performance of biocarbons. Moreover, the influence of post-mechanochemical treatment on the Na-ion storage performance of biocarbons is studied through kinetic evaluations. It is confirmed that reducing the particle sizes and increasing the carbon purity of biocarbons and the formation of gel polymeric networks would improve the Na-ion storage capacity, as well as the pseudocapacitive contribution to the total current. At a high-current density of 500 mA g⁻¹, a specific Na-ion storage capacity of 134 mAh g⁻¹ is recorded on the biocarbon prepared at 600 °C, followed by ball-milling and washing treatment, exhibiting a reduced charge transfer resistance of 49 Ω and an improved Na-ion diffusion coefficient of 4.8 × 10⁻¹⁹ cm² s⁻¹. This article proposes a simple and effective technique for the preparation of low-cost biocarbons to be used as the anode of Na-ion batteries. Full article

Adsorption is one of the most crucial processes in water treatment today. It offers a low-cost solution that does not require specialized equipment or state-of-the-art technology while efficiently removing dissolved contaminants, including heavy metals. This process allows for the utilization of natural or artificial adsorbents or a combination of both. In this context, polymeric materials play a fundamental role, as they enable the development of adsorbent materials using biopolymers and synthetic polymers. The latter can be used multiple times and can absorb large amounts of water per gram of polymer. This paper focuses on utilizing adsorption through hydrogels composed of poly(acrylamide-co-itaconic acid) for removing Cu²⁺ ions dissolved in aqueous media in a semi-continuous process. The synthesized hydrogels were first immersed in 0.1 M NaOH aqueous solutions, enabling OH⁻ ions to enter the gel matrix and incorporate into the polymer surface. Consequently, the copper ions were recovered as Cu(OH)₂ on the surface of the hydrogel rather than within it, allowing the solid precipitates to be easily separated by decantation. Remarkably, the hydrogels demonstrated an impressive 98% removal efficiency of the ions from the solution in unstirred conditions at 30 °C within 48 h. A subsequent study involved a serial process, demonstrating the hydrogels’ reusability for up to eight cycles while maintaining their Cu2+ ion recovery capacity above 80%. Additionally, these hydrogels showcased their capability to remove Cu²⁺ ions even from media with ion concentrations below 100 ppm. Full article

Sustained release is highly desired for “efficacious, safe and convenient” drug delivery, particularly for those anticancer drug molecules with toxicity. In this study, a modified coaxial electrospraying process was developed to coat a hydrophobic lipid, i.e., stearic acid (SA), on composites composed of the anticancer drug tamoxifen citrate (TC) and insoluble polymeric matrix ethylcellulose (EC). Compared with the electrosprayed TC-EC composite microparticles M1, the electrosprayed SA-coated hybrid microparticles M2 were able to provide an improved TC sustained-release profile. The 30% and 90% loaded drug sustained-release time periods were extended to 3.21 h and 19.43 h for M2, respectively, which were significantly longer than those provided by M1 (0.88 h and 9.98 h, respectively). The morphology, inner structure, physical state, and compatibility of the components of the particles M1 and M2 were disclosed through SEM, TEM, XRD, and FTIR. Based on the analyses, the drug sustained-release mechanism of multiple factors co-acting for microparticles M2 is suggested, which include the reasonable selections and organizations of lipid and polymeric excipient, the blank SA shell drug loading, the regularly round shape, and also the high density. The reported protocols pioneered a brand-new manner for developing sustained drug delivery hybrids through a combination of insoluble cellulose gels and lipid using modified coaxial electrospraying. Full article

The aim of this study was to assess the gelling potential of chiral oxalamide derivatives in vegetable oils. Special emphasis was given to the potential applications of the examined oil gels as sustained delivery systems and as fat substitutes in food products. The applicability of oil gelators is envisaged in food, cosmetics, and the pharmaceutical industry. The regulations requiring the elimination of saturated fats and rising concerns among consumers health motivated us to investigate small organic molecules capable of efficiently transforming from liquid oil to a gel state. The oxalamide organogelators showed remarkable gelation efficiency in vegetable oils, thermal and mechanical stability, self-healing properties, and a long period of stability. The physical properties of the gels were analysed by TEM microscopy, DSC calorimetry, and oscillatory rheology. The controlled release properties of acetylsalicylic acid, ibuprofen, and hydrocortisone were analysed by the LC–MS method. The influence of the oil type (sunflower, soybean, and olive oil) on gelation efficiency of diverse oxalamide derivatives was examined by oscillatory rheology. The oxalamide gelators showed thermoreversible and thixotropic properties in vegetable oils with a minimum gelation concentration of just 0.025 wt%. The substitution of palm fats with gelled sunflower oil applied in cocoa and milk spreads at gelator concentrations lower than 0.2 wt% have shown promising viscoelastic properties compared to that of the original food products. Full article

Biopolymers are organic polymers that can be treated into intricate designs with porous characteristics that mimic essential biologic components. Due to their superior biosafety, biodegradability, biocompatibility, etc., they have been utilized immensely in biomedical engineering, regeneration, and drug delivery. To obtain the greatest number of results, a literature search was undertaken in scientific search engines utilizing keywords. Chitosan is used in a variety of medical sectors, with the goal of emphasizing its applications and benefits in the clinical dental industry. Chitosan can be dissolved in liquid form and combined with other substances to create a variety of products, including fibers, hydrogels, membranes, microspheres, resins, sponges, pastes, tablets, and micro granules. Chitosan has been studied in a variety of dental applications. Chitosan is used in the prevention of caries and wear, in pulpotomy to accelerate osteogenesis in guided tissue regeneration due to its hemostatic property, and primarily to benefit from its antimicrobial activity by adding it to materials, such as glass ionomer cement, calcium hydroxide, and adhesive systems. With its antibacterial activity and biocompatibility, chitosan is leading the pack as a promising ingredient in the production of dental materials. The current review provides an update on the background, fundamentals, and wide range of uses of chitosan and its gels in dental science. Full article

Purpose: The goal of this study was to make pH-sensitive HPMC/Neocel C19-based interpenetrating polymeric networks (IPNs) that could be used to treat different diseases. An assembled novel carrier system was demonstrated in this study to achieve multiple functions such as drug protection and self-regulated release. Methods: Misoprostol (MPT) was incorporated as a model drug in hydroxyl-propyl-methylcellulose (HPMC)- and Neocel C19-based IPNs for controlled release. HPMC- and Neocel C19-based IPNs were fabricated through an aqueous polymerization method by utilizing the polymers HPMC and Neocel C19, the initiator ammonium peroxodisulfate (APS), the crosslinker methylenebisacrylamide (MBA), and the monomer methacrylic acid (MAA). An IPN based on these materials was created using an aqueous polymerization technique. Samples of IPN were analyzed using scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), thermal analysis (TGA), and powder X-ray diffraction (PXRD). The effects of the pH levels 1.2 and 7.4 on these polymeric networks were also studied in vitro and through swelling experiments. We also performed in vivo studies on rabbits using commercial tablets and hydrogels. Results: The thermal stability measured using TGA and DSC for the revised formulation was higher than that of the individual components. Crystallinity was low and amorphousness was high in the polymeric networks, as revealed using powder X-ray diffraction (PXRD). The results from the SEM analysis demonstrated that the surface of the polymeric networks is uneven and porous. Better swelling and in vitro results were achieved at a high pH (7.4), which endorses the pH-responsive characteristics of IPN. Drug release was also increased in 7.4 pH (80% in hours). The pharmacokinetic properties of the drugs showed improvement in our work with hydrogel. The tablet MRT was 13.17 h, which was decreased in the hydrogels, and its AUC was increased from 314.41 ng h/mL to 400.50 ng h/mL in hydrogels. The blood compatibility of the IPN hydrogel was measured using different weights (100 mg, 200 mg, 400 mg, and 600 mg; 5.34%, 12.51%, 20.23%, and 29.37%, respectively). Conclusions: As a result, IPN composed of HPMC and Neocel C19 was successfully synthesized, and it is now possible to use it for the controlled release of MPT. Full article

High-performance greases typically consist of a base oil and polyurea as a thickener material. To date, few alternatives to polyureas have been investigated. Polyesters could be one such alternative; however, little is known about the gelation of such polyesters because, unlike polyureas, they cannot form hydrogen bonds between the polymer chains. Here, we present studies on the gel formation of a polyester based thickener poly(hexane dodecanoate) with 1-octanol endgroups in three different base oils, i.e., a mineral oil (Brightstock 150), a synthetic Polyalphaolefin (Spectrasyn 40) and castor oil (85 to 90 wt.% ricinoleic acid triglyceride). Small- and wide-angle X-ray scattering measurements indicate a strong interaction of the polyester with castor oil and an increase in the crystalline fraction, with an increasing polymer amount from 5 to 40 wt.%. Moreover, infrared analysis of the polyester in castor oil showed gel formation at a minimum concentration of 20 wt.%. The strong interaction of the polyester with castor oil compared to the other two base oils led to an increase in the yield point γ_F as a measure of the mechanical stability of the gel, which was determined to be 5.9% compared to 0.8% and 1.0% in Brightstock and Spectrasyn, respectively. Full article

Self-healing, thermoresponsive hydrogels with a triple network (TN) were obtained by copolymerizing N-isopropyl acryl amide (NiPAAm) with polyvinyl alkohol (PVA) functionalized with methacrylic acid and N,N′-methylene bis(acryl amide) crosslinker in the presence of low amounts (<1 wt.%) of tannic acid (TA). The final gels were obtained by crystalizing the PVA in a freeze-thaw procedure. XRD, DCS, and SEM imaging indicate that the crystallinity is lower and the size of the PVA crystals is smaller at higher TA concentrations. A gel with 0.5 wt.% TA has an elongation at a break of 880% at a tension of 1.39 MPa. It has the best self-healing efficiency of 81% after cutting and losing the chemical network. Step-sweep strain experiments show that the gel has thixotropic properties, which are related to the TA/PVA part of the triple network. The low amount of TA leaves the gel with good thermal responsiveness (equilibrium swelling ratio of 13.3). Swelling-deswelling loop tests show enhanced dimensional robustness of the hydrogel, with a substantial constancy after two cycles. Full article

Hydrogels are widely used in wound dressings due to their moisturizing properties and biocompatibility. However, traditional hydrogel dressings cannot monitor wounds and provide accurate treatment. Recent advancements focus on hydrogel dressings with integrated monitoring and treatment functions, using sensors or intelligent materials to detect changes in the wound microenvironment. These dressings enable responsive treatment to promote wound healing. They can carry out responsive dynamic treatment in time to effectively promote wound healing. However, there is still a lack of comprehensive reviews of hydrogel wound dressings that incorporate both wound micro-environment monitoring and treatment functions. Therefore, this review categorizes hydrogel dressings according to wound types and examines their current status, progress, challenges, and future trends. It discusses various wound types, including infected wounds, burns, and diabetic and pressure ulcers, and explores the wound healing process. The review presents hydrogel dressings that monitor wound conditions and provide tailored treatment, such as pH-sensitive, temperature-sensitive, glucose-sensitive, pressure-sensitive, and nano-composite hydrogel dressings. Challenges include developing dressings that meet the standards of excellent biocompatibility, improving monitoring accuracy and sensitivity, and overcoming obstacles to production and commercialization. Furthermore, it provides the current status, progress, challenges, and future trends in this field, aiming to give a clear view of its past, present, and future. Full article

The main method of treatment and prevention of endophthalmitis is a combination of intravitreal and topical administration of antibiotics, such as cefuroxime moxifloxacin or vancomycin. However, this method is ineffective due to the rapid elimination of the drug. This problem can be solved with the help of intravitreal in situ injection systems, which are injected with a syringe into the vitreous body and provide prolonged action of the drug at the focus of inflammation. Under the influence of temperature, the liquid drug undergoes a phase transition and turns into a gel after injection. This ensures its prolonged action. The study aimed to develop an intravitreal in situ cefuroxime delivery system for the treatment of endophthalmitis based on a thermosensitive biodegradable composition of poloxamer 407 and hyaluronic acid. A combination of poloxamer Kolliphor^® P407, Kolliphor^® P188, and PrincipHYAL^® hyaluronic acids of different molecular weights was used as a delivery system. The potency of cefuroxime solid dispersion with polyvinylpyrrolidone-10000, polyethylene glycol-400, and polyethylene glycol-1500 in a 1:2 ratio was studied for prolonged action compared to cefuroxime substance. The experimental formulations were studied for the parameters of gelation temperature in a long-term test (4 months), pH, and release of cefuroxime using dialysis bags. To study the distribution parameter in the vitreous body, an in vitro model (1/13) was developed, which was a hollow agar sphere filled with 1% (w/v) polyacrylate gel. For the superior formulations, a HET-CAM test (chorioallantoic membrane test) was performed to determine the absence of irritant effects. According to the study results, a formulation containing a solid dispersion of cefuroxime:PEG-400 (1:2), the matrix of which contained 18% (w/v) Kolliphor^® P407 poloxamer, 3% (w/v) Kolliphor^® P188 poloxamer, and 0.5% (w/v) hyaluronic acid (1400–1800), was selected. This sample had an average gelation temperature of 34.6 °C, pH 6.7 ± 0.5, and a pronounced prolonged effect. Only 7.6% was released in 3 h of the experiment, whereas about 38% of cefuroxime was released in 72 h. No irritant effect on the chorioallantoic membrane was observed for any formulations studied. Full article